|
|
首页 >> 产品中心 >> 正文 |
|
|
|
程控切纸机 |
发布日期:[2007-01-17] 共阅[1377]次 |
产 品 详 细 介 绍 |
QZYK 程控切纸机 产品介绍: 配置日本三菱交流数字伺服控制技术,5.7英寸显示屏,数据分辨率0.01mm,具有自我故障诊断功能和运转模式显示,100个程序组,5000个以上的不同位置的裁切,可记忆、储存,可动态跟踪,最高推纸速度5-16米/分钟。选用意大利液压元件,日本、韩国电器元件,台湾滚珠丝杆,线性导轨,电器配置为可编程序控制器PLC对所有电器、机械实行监控,关键部位均采用进口低保养轴承。 功能: 1. 滚珠丝杆和线性导轨使推纸器运行平稳轻快、噪音低、定位准确,大大提高裁切精度和速度,并延长了机器的使用寿命。 2. 大小工作台全部镀铬并带气垫,推纸轻便且不生锈,可选装加大侧工作台(1000*800mm)。 3. 红外光电保护双手按钮连动保护装置。 4. 刀床安全保护装置、裁切过载保护并自动回位等安全保护装置。 5. 液压系统采用进口液压元件,压纸压力可调大小,压纸由二次增压系统。 6. 机械辅助换刀装置,使换刀方便快捷,更安全。 7. 装有光学对刀线,使裁切更方便。 8. 镀铬工作台。 9. PLC控制系统。 10. 垫刀条顶出装置。 11. 平面二次包络蜗轮减速度机传动。 12. 内置式电子刀锁使裁切更为安全可靠。 技术参数:
型号 |
920 |
1150 |
1300 |
1370 |
裁切门幅宽度 |
920mm |
1150mm |
1300mm |
1370mm |
最大裁切高度(不带辅助压板) |
120mm |
160mm |
130mm |
160mm |
最大裁切深度 |
1100mm |
1150mm |
1300mm |
1450mm |
最小裁切深度(不带辅助压板) |
25mm |
30mm |
30mm |
30mm |
工作台前伸长度 |
650mm |
700mm |
730mm |
730mm |
工作台高度 |
880mm |
880mm |
880mm |
880mm |
机器宽度(含侧工作台) |
2180mm |
2380mm |
2630mm |
2700mm |
工作台总长度 |
2150mm |
2220mm |
2420mm |
2750mm |
裁切速度 |
40次/分 |
45次/分 |
45次/分 |
45次/分 |
最大压纸力 |
35000N |
40000N |
40000N |
45000N |
主电机功率 |
3kw |
4 kw |
4 kw |
4 kw |
送纸电机 |
0.37kw |
0.55 kw |
0.55 kw |
0.55 kw |
风机 |
0.55kw |
0.75 kw |
0.75 kw |
0.75 kw |
机械重量 |
2800kg |
4000kg |
4000kg |
4800kg |
外包装尺寸(L*W*H) |
2280×1400×1850mm |
2500×1550×2100mm |
2600×1600×2000mm |
2880×1600×2100mm |
QZYK Computerized Pager Cutters Product introduce: It is equipped with japanese Mitsubishi AC digital servo controlling technologe ang 5.7 inch display screen,the data resolubles and displays the operating patrern,100 program units,over 5000 different cutting positions ,it can memorize,store and dynamic follow-up.The max paper-pushing speed is 5-16m/min.It adopts ltaly hydraulic components,japan and korea electric components,Taiwan ball lead screw,linear guide-rail.PLC controller can monitor all the electrical and mechanical section.Its key parts adopt importsd bearing of low maintenance. Main features: 1. Ball lead screw and linear guide-rail makes paper impeller run smooth,low noise,accurate positioning,enhance the cutting precision and speed greatly,prolong the service lift of paper cutter. 2.The working tables are all chrome-plated and equipped with air balls which makes paper-pushing easily and rusty-proof.Large side workingtable(1000*800) is optional. 3.IR photoelectric protection,buttons by two hands safety devices. 4.Safety device for knife bed, overloading protection for cutting,automatic return safety device. 5.Imported hydraulic components are adopted in hydraulic system,the pressure can be adjusted.The paper is pressed twice by pressure-increased system. 6.Mechanical assistance device for knife replacement makes knife replaced quickly and safely. 7.Optical knife alignment equipped makes cutting more convenient. 8.Chrome-plated working table. 9.PLC control system. 10.Ejecting device for knife bar. 11.Flat worm speed reducer transmission. 12.Inside electronic knife locker to make the cutting more safety and stable. Technical parameter:
Model |
920 |
1150 |
1300 |
1370 |
Cutting Width |
920mm |
1150mm |
1300mm |
1370mm |
Max. cutting height without assistance pressing plate |
120mm |
160mm |
130mm |
160mm |
Max. cutting depth |
1100mm |
1150mm |
1300mm |
1450mm |
Min. cutting depth without assistance pressing plate |
25mm |
30mm |
30mm |
30mm |
Extended length of working table |
650mm |
700mm |
730mm |
730mm |
Height of working table |
880mm |
880mm |
880mm |
880mm |
Machine width including side working table |
2180mm |
2380mm |
2630mm |
2700mm |
Total length of working table |
2150mm |
2220mm |
2420mm |
2750mm |
Cutting speed |
40times/min |
45 times/min |
45 times/min |
45 times/min |
Max. paper pressure |
35000N |
40000N |
40000N |
45000N |
Power of main motor |
3kw |
4 kw |
4 kw |
4 kw |
Motor for paper feeding |
0.37kw |
0.55 kw |
0.55 kw |
0.55 kw |
Air pump |
0.55kw |
0.75 kw |
0.75 kw |
0.75 kw |
Machine Weight |
2800kg |
4000kg |
4000kg |
4800kg |
Overall dimension(L*W*H) |
2280×1400×1850mm |
2500×1550×2100mm |
2600×1600×2000mm |
2880×1600×2100mm | |
|
|
|
|
|