网站首页企业概况新闻中心产品中心招聘信息产品视频在线留言联系我们
 
模切机系列
压痕机系列
糊盒机系列
糊箱机系列
裱纸机系列
印刷机系列
覆膜机系列
切纸机系列
复合机系列
分切机系列
精装书系列
礼品盒系列
折页机系列
吹膜机系列
制袋机系列
凹版印刷机系列
食品-药品包装机系列
瓦楞纸板生产线系列
其他纸箱机械系列
首页 >> 产品中心 >> 正文
五层瓦楞纸板生产线
发布日期:[2007-01-23]    共阅[1333]次
产 品 详 细 介 绍

五层瓦楞纸板生产线
瓦楞纸板生产线一般由下列设备构成:原纸架、热缸机、接纸机、单面瓦楞机、天桥架、多重预热器、上浆机、双面机、分纸压线机、横切机、堆码机、锅炉等设备组合而成。由原纸架输入卷形原纸,经过热缸机加热及调节湿度,进入单面瓦楞机,经过瓦楞机的滚轧成形,与另一面纸粘合成单面瓦楞纸,由天桥架传送,经多重预热器再次加热,经上浆机粘糊再至双面机加热贴合,此时连续的瓦楞纸板即已成形。再经分纸压线机做纵向的分割及折痕压线及切断机横纵向的精确切断,此时一块块四方形的瓦楞纸板即已生产完成,最后由堆码机做堆叠整理及张数计算,一条完整生产线的成品即由此堆码机输出。我司可根据客户的需要,为其量身定做各种配置的生产线。
Corrugated board production line generally includes the following parts: Mill Roll Stand, Pre-heater, Auto Splicer, Single facer, Overhead bridge conveyor, Multiple heater for liner, Gluer, Double facer, Slitter scorer, Cutter, Down stacker, Boiler and etc. The web paper is inputted by Mill Roll Stand, and after heated and regulating the moisture by the pre-heater, the paper is put into the Single Facer for shaping and then conglutinating with another top paper to form a single corrugated board. The single corrugated board is then transmitted by the overhead bridge conveyor to multiple heater to be reheated, after this the paper is to double facer for being heated and jointed, herein a continuous corrugated board is formed. Being longitudinal slitted and pressed by Slitter scorer and accurate transverse and longitudinal cut by Cutter, pieces of square corrugated boards are finished, which are piled up and counted by the Down stacker. The finished products of a complete corrugated board production line are finally put out by down stacker. We can provide all kinds of configurations for the production line as per the specific requirements of the customers.

五层瓦楞纸板生产线,可生产三层和五层瓦楞纸板。除了和三层瓦楞纸板具有相同的应用之外,五层瓦楞纸板还可用作,诸如电视机,电冰箱,水果,香烟,饮料等许多领域的包装材料。该生产线除可生产AB 和BC两种复合瓦外,还可以按照客户的特殊要求来生产瓦楞纸板。五层瓦楞生产线的基本构成为:单面瓦楞机(2),原纸架(3-5),预热器(4),多重预热器(速度高于120m/mim时,预热辊的直径应为900mm),输送过桥(1),双面上胶机(1),粘和烘干机(1),分纸压线机(薄形刀刃和碗型刀刃可供选择),横切机(1),堆码机(1)。速度可为80m/min,100 m/min,120 m/min,150 m/min,180 m/min,以满足客户的不同要求。
Double wall corrugated production line
With this line, single wall and double wall corrugated board can be produced. Besides the application scope of single wall corrugated board, The double wall product is also widely used as packing material in many fields such as TV set, refrigerator, fruit, cigarette, beverage, and so on. Two flute combinations (A&B, C&B) as well as special customer-tailored flutes are provided. Steam heating and oil heating are optional (but oil heating is not suitable for line with speed above 100m/min). The standard five ply line is made up of single facer (2), mill roll stand (3~5), preheater (4), multiplex preheater (preheating roll diameter should be φ900mm for speed above 120m/min), conveying bridge (1), duplex glue machine (1), double facer (1), slitter scorer (1) (thin-blade or flaring slitting tool is optional), cut-off (1), stacker (1). Speed of 80m/min, 100m/min, 120 m/min, 150m/min or 180 m/min is offered to meet customer’s requirement.
打印此页 】 【 返回
 

招聘信息
·[上海招聘]英语翻译
·[厦门招聘]英语翻译
·[厦门招聘]外贸助理

    Copyright 2007 © xianghan-machine.com All Right Reserved.闽ICP备06000905号
Phone:13806098626 - QQ:75764170